Counting Display Wireless

The E-Series Display Timers combine the timing accuracy and precision of our most popular Elapsed Time Timing Systems with the crowd pleasing presentation of one of our Large LED Displays, all in one package. This Display Timer is a live counting timer displaying time to a thousandth of a second in digit height from 24in/61cm down to 5in/13cm models. When the vehicle 'breaks' the starting beam, the display starts counting. Breaking the finish line beam stops the elapsed timing. The LED display continuously displays the current time counting live at 0.001 second intervals and freezes the display when the finish line is crossed. Power can be supplied to the timer from any 12 volt DC power source or by using the optional 110VAC/230VAC Power Adapter.

All wireless E-Series Display Timers ship with internal wireless matched to our T-Link2 Wireless Uits at the start and finish line. T-Link Wireless is configured to connect to an external track sensor via a 25-foot interconnect cable. The external sensor configuration is designed for applications where it is desirable to relocate the T-Link Wireless unit away from the track and out of harm's way


[ Previous Page ]

• Easy Infrared Sensor Setup and Alignment
• 0.001 second accuracy, 999.999 second capable
• Live counting display while timing run
• Sensor Alignment checked on every run

[ Previous Page ]

Elapsed Time (seconds)		0.000 to 999.999
Hi-Speed Car Detection		Encoded infrared beam
Display Type		Ultrabright red LED scoreboard
IR Beam Emitter		Four AA size
Digit Size:		24in/61cm 5-digit 15in/38cm 5-digit 8in/20cm 6-digit 5in/13cm 6-digit

[ Previous Page ]

What do I get when I order an E-series Display Timer? E-series Elapsed Time Diaplay Timers are LED Displays and timers all in one. The E-series designates an ET timer shipped with two battery powred Infrared Beam Emitters and two Infrared Track Sensors for the start and finish lines. Two T-Link2 Wireless Units connect with two 25ft cables to the start and finish sensor. A handheld pushbutton is also included and can be connected at the start or finish line.

How does the timer operate? Press the handheld pushbutton to clear the timer. When the vehicle crosses the start line, the DIsplay Timer begins live counting. The time freezes when the vehicle crosses the finish line.

Can I connect a PC and capture times? Yes, Counting Display Timers are compatible with data capture software by AXWare Systems. Click the RACE SOFTWARE button above to view the AXWareET software package.

[ Previous Page ]