Lap Count Displays
Lap Count Displays are microprocessor controlled display based upon the 7-segment format display digit using the latest technology Ultra-Bright LEDs. Two models are available both with three 15in/38cm or 24in/61cm tall digits to display the lap number. Control of these displays is accomplished by our Wireless Hand Cntroller, standalone PC software to manually control the lap count, or automatic control from Mylaps Orbits or Westhold Race Manager. Communications can be our proprietary wireless or your existing IP Network. For user's manual click here.

Wireless Lap Counter
Control with the Wireless Hand Controller
The Wireless Hand Controller can increment and decrement the lap count and clear the display and lap count.
Keypad Functions
Hand Controller
+1Increments the lap count by 1
+10Increments the lap count by 10
+100Increments the lap count by 100
-1Decrements the lap count by 1
-10Decrements the lap count by 10
CLEARLap count is set to zero and display cleared
The Wireless Hand Controller contains an internal USB rechargable battery lasting up to 180 hours on a single 2-hour charge. Place the Wireless Hand Controller within Line-of-Sight to the Wireless Lap Count display and use the handheld keypad to control the displayed lap.
Control with Standalone PC Software
Using our model 3135 PC software, lap number can be manually entered, incremented, decremented, and cleared. The utility program can control the Lap Cont Display from your PC or laptop. Available for both wireless and IP network models.
Control automatically from Orbits or Race Manager
Using our model 3130 PC software, the Rmonitor Scoreboard Feed from Orbits or Race Manager is managed by the interface program and automatically displays the current lap or can count the laps down. Simple configuration to point to the Rmonitor feed and redirect to the Lap Count Display. Available for both wireless and IP network models.
[ Previous Page ]