| Race Event Management, LED Scoreboards output, and Corner Safety Light control are now available from one central PC in the tower. Race Manager allows the track owner to verify transponder operation before the race begins to avoid missed lap times. |
 |
Set-up Race Manager's Setup Screen can configure minimum transponder signal levels to eliminate stray units from interfering with a race in progress. Configure the scoreboard, minimum lap time, how caution laps will be handled, and lineup after a caution. Race Manager can even generate live race action webpages updated realtime. All transponder crossing information can be saved to the hard drive as an audit check and backup. |
| Assign Screen Enter multiple heat names, then enter driver names and car numbers. Pair the drivers to their transponder by entering the serial number printed on each transponder, Now you're ready to keep track of practice, qualifying and start the heats. Simple to use, simple to operate.  |
| Split Screen Monitoring Using the split screen feature of Race Manager, view each transponder crossing as it occurs on the right while viewing changes in position on the left. Select the Qualify View and run practice and qualifying. The scoreboard updates automatically with each lap time as they occur and where their qualifying lap fits into the fastest times.  |
| Starting a Race Using the Pre-Start feature, Race Manager can verify proper operation of each transponder on the track when the pace car is out. Pre-start highlights in blue each time a transponder crosses the finish line. When the green flag comes out, switch to 'Start' and record the starting order as they cross the line and each lap. Race Manager automatically updates the scoreboard with the top five positions and current lap. Use the Lineup button to send the lineup positions to the scoreboard or print them for the next heat.  |
| Under the Caution Flag Click on the yellow Caution Flag button to tell Race Manager the caution flag is out. As the vehicles continue their laps, Race Manager highlights the crossings in yellow. Preselected rules of whether to count caution laps or partial laps are applied. Click on Start when you're ready to continue under the green flag. Click the Scoreboard button to illuminate or flash the yellow, red, or green lights on the Wireless Corner Safety Lights.  | |
 | |
[Home]