 |
Model 3221 LED Win Lights
As soon as the first vehicle passes through the finish line, the LED Win Light flashes to let the crowd know who won. A pair of LED Winning Lane Indicators placed outside each lane on the track at the finish line indicate who crossed first. The Timer SBD console uses a single cable to connect both the win lights and the IR Sensors. Power to the win lights is supplied by the console so no addition battery power is required! LED Win Lights can be panel mounted or placed on the optional metal base stands. |
 |
Models 6560, 6860 Large Digital Display
Nothing keeps the crowd involved with the racing action better than a Large Digital Display. At the end of every race, our Large Digital Displays tell the crowd which lane won and by how much time. These displays are available in 5" tall digits and 8" tall digits and are configured to complement the timing capabilities of the Timer SBD and display the results to the crowd immediately after booth vehicles pass the finish line.
The model 6860 Large Digital Display is made by RaceAmerica and contains 8 inch tall LED digits while the 6560 model contains 5" tall digits. These are no ordinary LEDs either! This display is clearly viewable in bright sunlight. Even with the sun shining directly into the display, the digits are clearly viewable up to 320 feet away for the 8" and 200 feet away for the 5". With this display at your race, you can watch the heads turn towards the display to see how close the race really was. For more information and a detailed description of this type of Large Digital Display, click here |
 |
Model 6038 Dot Matrix Printer
Finally! A battery powered printer! This 40-column Dot Matrix Serial Printer ships from RaceAmerica with the battery power supplied from the timing system. No batteries required! The printer uses a standard 1/2" wide ribbon to produce clean, crisp characters on 4-1/2" wide continuous feed paper available at any office supply store. An external paper roll stand is included to accomodate larger rolls of paper. The printer offers a very compact size measuring 8"W x 8"D x 4"H. without the printer roll stand attached. |
 |
Model 6070 Carry Cases
Custom Blowmolded Carry Our Blow Molded Carrying Case with custom foam inserts can hold the Timer SBD console and the IR Sensors and Emitters to protect them between events. The Carrying Case can also accomidate the printer, printer cable, spare roll of paper, AC Adapters for the timer and the large display, and DC power cables. The best protection offered for the timing equipment is a foam filled custom carrying case fitted to the equipment. |
 |
Model 7540 Sensor & Emitter Stands
Our IR Beam Emitters and IR Track Sensors are designed to be positioned flat on the road surface with the beam 1-1/2" off the race surface. If the racing surface has a severe crown or if your preference is to elevate the Emitter and Sensor to detect the body of the vehicle and protect the electronics, our new Foam Stands make it easy to set the beam at 6" off the race surface. These stands can be used for both Emitters and Sensors with easy assembly. The Foam Stand has a 6-1/2" x 7-1/4" footprint and stands 7-5/8" tall and for even more stability, weight can be added to the bottom of the stand or the stand can be attached to the racing surface. The straight forward design of these stands make them perfect for all types of racing events with easy setup and tear down. |
[Home]