by lazdee » Thu Jan 10, 2019 11:57 am
Usually the cables connected to a wireless T-Link are relatively short at under 100ft. Current requirements for a track sensor are small so the voltage drop through the cable is negligible. This probably would be a concern if the cable was 800 or 900ft long, but, this scenario should not exist with the wireless application.
Nice thing about the T-Link Wireless 3.0 is the lower power output, lower power consumption, higher RF output, and full battery protection. All this makes it possible to power the T-Link 3 with the USB Lithium-Ion Battery Pack without issue.