How to test my LED display?

Topics about Scoreboards and Displays hardware products, questions, features, functionality.

How to test my LED display?

Postby Dakimmer » Thu May 31, 2018 12:07 pm

I have an older 6860 display and need to know if it is working. I can connect it to my PC but I when I run my software and nothing shows up on the display. How can I test if the display is working?
User avatar
Dakimmer
 
Posts: 24
Joined: Wed May 30, 2018 4:34 am

Re: How to test my LED display?

Postby raceamerica » Thu May 31, 2018 12:23 pm

First, flip all the DIP switches on the display to ON except for DIP 8, set it to OFF. Power on the display and connect it to the PC.

Download our Display Utility at:

*** RIGHT CLICK THE LINK BELOW TO OPEN IN A NEW TAB ***

http://www.raceamerica.com/pcsw.html

and run it on the PC. Select the PC COM port for the display and you should be able to send ET and other things if the display and cable are working.
User avatar
raceamerica
Site Admin
 
Posts: 189
Joined: Thu May 10, 2018 11:24 am


Return to Scoreboards and Displays

Who is online

Users browsing this forum: No registered users and 1 guest

cron