Toggle between flags on Digital Safety Flag

Topics about Track Safety software products, questions, features, functionality

Toggle between flags on Digital Safety Flag

Postby Richkim » Wed Jun 06, 2018 12:46 pm

The track i run at has your DIgital Safety Flags installed. When the Pace Car is out on track, they toggle between the PC flag and a double yellow flag. The PC is displayed longer than the double yellow flag and it would be better to display the double yellow longer than the PC. Can this be easily changed?
Richkim
 
Posts: 10
Joined: Sun Jun 03, 2018 2:19 pm

Re: Toggle between flags on Digital Safety Flag

Postby lazdee » Wed Jun 06, 2018 1:11 pm

Toggling between flags is a feature of the Digital Safety Flag software called Flag Link. This features links one flag to another so they appear to toggle back and forth between both flags. Once configured, the primary flag will display 60% of the time and the linked flag will display 40% of the time. This is why you notice the PC is displayed longer then the double yellow.

To set it so the double yellow displays longer, make the double yellow the primary flag and link it to the pace car PC flag. Now the double yellow will display 60% of the time and the PC will display 40% of the time. Here are screen shots of the two setups:

PCprimary.jpg
DBprimary.jpg
You must LOGIN or REGISTER to view the attachments to this post.
User avatar
lazdee
 
Posts: 31
Joined: Thu May 10, 2018 1:56 pm


Return to Track Safety Products

Who is online

Users browsing this forum: No registered users and 0 guests